Turntable control by servo motor.Injection unit with single cylinder structure and guide linear.Injection unit frame with space can install small unit or short screw.
Modular design,injection unit can exchange.Optimized control system excellent in response and accuration.
SPECIFICATIONS
| PARAMETER | UNIT | HMDP160 | |||
| international size rating | -- | 300 | 300 | ||
| INJECTION UNIT | A | B | A | B | |
| Injection volume(theoretical) | cm³ | 93 | 108 | 124 | 141 |
| Injection weight(PS) | g | 85 | 98 | 113 | 128 |
| oz | 3 | 3.5 | 4 | 4.5 | |
| Injection rate | g/s | 55 | 63 | 73 | 83 |
| Screw diameter | mm | 26 | 28 | 30 | 32 |
| Injection pressure | MPa | 342 | 295 | 257 | 226 |
| Screw L/D ratio | -- | 23 | 21.4 | 22.6 | 21.2 |
| Screw stroke | mm | 175 | 175 | 175 | 175 |
| Screw speed(stepless) | r/min | 0-244 | |||
| CLAMPING UNIT | |||||
| Clamping force | kN | 1600 | |||
| Mold Opening stroke | mm | 340 | |||
| Platen size | mm×mm | 960×680 | |||
| Rotary table diameter | mm | 800 | |||
| Dist.between tie bars(H×V) | mm×mm | 710×440 | |||
| Max.daylight | mm | 800 | |||
| Mold thickness(Min-Max) | mm | 160-460 | |||
| Ejector stroke | mm | 140 | |||
| Ejector tonnage | kN | 38×2 | |||
| Distance between barrel centers | mm | 420 | |||
| POWER UNIT | |||||
| Hydraulic system pressure | MPa | 17.5 | |||
| Pump motor power | kW | 18.7 | |||
| Heater power | kW | 6.8 | |||
| Number of temp control zones | -- | 4×2 | |||
| OTHERS | |||||
| Oil tank capacity | L | 330 | |||
| Machine dimensions(L×W×H) | m×m×m | 5.2×1.76×2.1 | |||
| Machine weight | Ton | 7.1 | |||
INJECTION UNIT
Injection unit with double separate set of barrel,injection on fly,double color with one shot products,to reduce the cycle time.Single cylinder of injection structure, more precise for injection.
Whole set supporter of injection unit with double precise linear guard,precise and fast speed starter.
Injection unit can be with different size,adapt with different double color products.
Barrel with PID temperature control.
HYDRAULIC UNIT
Hydraulic circuits adopt top brands valve and hose.
Equipped with DIN standard cone with sealing ring joint,manifold with G thread sealing gland.Self-sealing magnetic oilfilter convenient to maintenance.
CONTROL SYSTEM
Equipped with high-performance KEBA controller,large LCD display and man-machine friendly interface.Equipped with three light alarm with buzzer.
Hot Tags: double colour injection moulding machine, China double colour injection moulding machine manufacturers, suppliers, factory, Double Colour Injection Moulding Machine, double color injection molding machine, Two Colour Injection Moulding
