SPECIFICATIONS
| PARAMETER | UNIT | HMD90M8-SII | ||
| international size rating | -- | 282/90 | ||
| INJECTION UNIT | A | B | C | |
| Injection volume(theoretical) | cm³ | 129 | 163 | 201 |
| Injection weight(PS) | g | 117 | 148 | 183 |
| oz | 4.1 | 5.2 | 6.5 | |
| Injection rate | g/s | 98 | 123 | 152 |
| Screw diameter | mm | 32 | 36 | 40 |
| Injection pressure | MPa | 219 | 173 | 140 |
| Screw L/D ratio | -- | 22:1 | 19.6:1 | 17.6:1 |
| Screw stroke | mm | 160 | ||
| Screw speed(stepless) | r/min | 0-300 | ||
| CLAMPING UNIT | ||||
| Clamping force | kN | 900 | ||
| Mold Opening stroke | mm | 320 | ||
| Platen size | mm×mm | 535×535 | ||
| Space between tie bars | mm×mm | 360×360 | ||
| Max.daylight | mm | 680 | ||
| Mold thickness(Min-Max) | mm | 150-360 | ||
| Hydraulic ejection stroke | mm | 100 | ||
| Hydraulic ejection force | kN | 31 | ||
| POWER UNIT | ||||
| Hydraulic system pressure | MPa | 16 | ||
| Pump motor power | kW | 18.7 | ||
| Heater power | kW | 8.6 | ||
| Number of temp control zones | -- | 4 | ||
| OTHERS | ||||
| Oil tank capacity | L | 125 | ||
| Machine dimensions(L×W×H) | m×m×m | 4.0×1.21.9 | ||
| Machine weight | Ton | 3.5 | ||
CLAMPING UNIT
Smooth and Fast Movement, High Rigid Platen, Longer Lifespan of Tie Bar.
Middle part strengthen design clamping unit and enhance tie bar, after the finite element analysis and optimization,the clamping mechanism has the advantages of smooth and fast movement, good rigidity platen and long lifespan of tie bar.
Standard with T-slot, easy mold mounted. The hydraulic motor drives the automatic mold adjustment device, stable, fast and efficient, and saves the time of mold mounted.
INJECTION UNIT
Optimized Design of Screw and Barrel, With Better Plasticizing Ability and Performance.
Double-cylinder injection system and double carriage cylinder, to make sure the injection movement stable and smoothly.
Equipped with guide liner design, with lower resistance. Injection and charge back pressure more fast, with high injection precision.
Optimize the design of screw and barrel, with stronger plasticizing ability and better plasticizing performance, to meet the different kinds of special products. The key components such as injection piston rod, injection driving platen and coupler are strengthened to greatly reduce the fracture probability of piston rod.
HYDRAULIC UNIT
High Precision,Energy-Saving,Quick-Response
Sync servo motor and driver, with digital dose loop control, energy saving andefficiency, fast response and precision control, more stable at low flow situation.
Increased motor power design, machine faster and more efficiency, shorten the production cycle time, improve production efficiency.
ELECTRIC UNIT
Standard with safety relay,safety hydraulic valve and metal cover protection are designed in accordance with GB2530 national safety standards, adding thermal master switch protection and five-hole plug protection to improve the safety performance of the whole machine. The key components are imported brands such as Schneder, ABB, OMRON etc.
The series equipped with high-performance controller, large LCD display and simple friendly operational interface.
Hot Tags: servo motor for injection molding machine, China servo motor for injection molding machine manufacturers, suppliers, factory, High Precision Servo Motor Injection Molding Machine, Fruit Basket Injection Molding Machine, injection molding machine servo motor, servo motor in injection molding machine, servo hydraulic injection molding machine, Servo Motor For Injection Molding Machine
